The Factory Rubicon Swaybar Disconnect is a great feature but is prone to breaking, shorting out and all around being annoying. The EVO No Limits Manual Disconnect now allows you to defeat the overly troublesome computer system that operates this very cool feature that Rubicon Model JK’s come with. The manually operated EVO No Limits Swaybar Disconnect now allows you, with a few turns of the dial, to disconnect your Rubicon Swaybar at anytime, in any gear, and with any amount of articulation. No need to bounce the vehicle, no pins to pull or fighting to reinstall, no sway bar links to remove, no punctured tires from removed sway bar links, just unrestricted articulation. Back to the highway… Simply turn the dial a few turns in the opposite direction on level or uneven ground and your sway bar will fully reconnect by itself for highway use. It is recommended to use a computer programmer to turn off the sway bar light function on your dashboard. *When disconnected, never exceed 20mph. Disconnect for off road use only.* INSTALLATION TIME 0.5-1 HOUR Compatible on all 2008-2025 Wrangler Rubicon JK and JL, 2020-2025 Jeep Gladiator aswell as Ram Power Wagons WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.