Unisteer Performance has a full line of U-Joints to match your steering needs. Our Performance Joints are all made with top quality needle bearings which allow minimal lash and a great working angle; up to 38 degrees! The polished stainless finish resists the elements and keeps that eye-popping appearance. Each joint is labeled with what each yoke has; if it is a splined application, the first number is the size either in standard or metric followed by a second number which indicates the number of splined teeth there are. If you cannot find your application, please measure it and count the teeth, or give us a call. This is a size that is used on some large GM steering columns. This specific U-Joint uses a pinch bolt fastener on the 3/4"DD side and a set screw on the 1"DD side, due to the large size Note: Torque U-Joint to 45ft. lbs. May need to repeat 1-2 times.