"Jeep Wrangler TJ Suspensions 1997-2006 Steering Crossover Kit Bare NOTE: THESE ARE BARE METAL (ie: NOT powder coated). If you want a powder coated part, please refer to one of our many powder coated parts. The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50"" x 0.25"" wall DOM tubing and is paired with 3/4"" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included. Installation will require the spindles and pitman arm to be drilled out to 5/8"". The adjustable length for this part is 35.6"" to 36.6"". If the dimension from your pitman arm bolt hole to the passenger spindle bolt hole is out of this range, you will need a different pitman arm or our ""Extended"" Crossover Steering Kit (J0053712 through J0053729). Click HERE for install instructions. It is recommended that you either have 4.00"" or less of backspacing or a minimum 16"" rim. Factory 15"" rims may rub the heim joints. Click HERE for FAQ video."