This is a complete replacement steering kit for your 2018-2026 Jeep Wrangler JL or 2019-2026 Gladiator JT . It includes the tie rod (DOM steel) which is also the adjusting sleeve, and left & right forged steel tie rod ends, the drag link (DOM steel) which is also the adjusting sleeve, and left & right forged steel drag link ends. Plus our NEW ProLock Washers. Depending on the options you choose above, it can be sent as an under knuckle mount (standard) or over knuckle mount (flip kit). All Flip Kits include the taper sleeve!!

Note:
taper sleeves require the knuckle drag link mount to be drilled through with a straight 7/8" drill bit. It does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use. NOTE 1
- Axle Width
- Do You Have a Dana 44 narrow axle or wide axle ??? Unfortunately, this can be confusing. NARROW axle Dana 44s are unusual, but the tie rod measures 57 1/2" to 58 1/2" ball-stud center to ball-stud center. The standard WIDE axle Dana 44 tie rod measures 60 1/2" to 61 1/2" ball-stud center to ball-stud center . If your Jeep has a narrow axle Dana 44, PLEASE select the Dana 30, which has the correct length tie rod.

FITMENT:
This steering system fits stock Dana 30/44 axles. If your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well, just contact us to order.

Please note :
Steel connecting rods are not designed for rock crawling. If you hit them heavily on a rock, they will likely bend and are therefore NOT WARRANTIED against impact damage. If you intend to rock crawl, please consider our aluminum connecting rod options.

Jam nut wrenches:
KIT521 - 2x WR112 41mm/46mm Replacement set screws : Tie Rod/Drag Link
- XP172