2007-2018 Jeep Wrangler JK Yeti XD JK Drag Link Top Mount Assembly (High Steer or Drilled-Out OE Knuckle). A Minimum Lift Height Of 3-3.5 inch (And Correct Bump Stop) Is Required For A Top-Mount Drag Link. Track Bar Relocation Bracket Required For Top Mount Drag Link To Maintain Proper Parallel Geometry Track Bar And Drag Link A minimum of 17 inch wheels is recommended. 16 inch wheels with a maximum 4.5 back spacing might fit but not guaranteed. The YETI XD Top Mount Draglink for a high steer or drilled-out stock knuckle was designed to be a complete bolt-on for JK's that have already been modified for a flipped draglink 30mm 2-1/2 Ton ball joints designed specifically for the JL and JT. Steel on steel bearings provide exceptional ball joint wear resistance and robustness. Powder coat over E-coat for a long lasting appearance under harsh conditions. Large 1 1/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads. Adjuster tube designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.