This upgraded battery cable kit replaces old worn out battery cables for more power and better performance from your vehicle. What's the Big 3 and why do you make a Big 7? The Big 3 or Big 4 upgrade means improving the current capacity of three cables: 1) alternator output to battery positive, 2) battery negative to frame/body, and 3) engine ground to frame/body. We don't stop there though. Our Big 7 kits also include the leads to the starter and the fuse relay box, as well as adding an external fuse to avoid routing the increase in current capacity through the smaller fuse box wiring. It's really one of the first mods you should do to any Jeep! What makes these cables so special? We're nerds for specs and finer details around here. None of that CCA (copper-clad aluminum) that's used in inferior products, or stereo installations. We only use fine-strand, SAE (Society of Automotive Engineers) approved, pure copper cable. Then using a powerful electromechanical crimping machine, we crimp each solid-copper end, and finally finish the construction by adding a environmental seal made of marine grade heatshrink meeting MIL-I-23053/4. Also included are military style corrosion resistant battery connections and an ANL fuse and holder. To make the entire install simpler, every end will be labeled for ease of installation. Do I need a bigger alternator to run these cables? No. Every vehicle can benefit from our better than factory cables. The years, along with environmental damage from rain/salt water/corrosion, can greatly impact your electrical system. Our customers have consistently reported that their vehicle starts faster, charges the battery better, and many times cured electrical gremlins that were brought on by compromised wiring. I've changed my mind! I want to run a bigger alternator! Perfect! You're probably running a power inverter, a stereo, a winch, an under hood welder, or flux capacitor. These all require more amperage than the stock alternator is capable of providing. Maybe you're not running any of these yet, but considering it, these cables will get you ready! 2GA or 4GA? Which to choose? As far as 2GA vs 4GA, it's really going to depend on what mods you're going to do to. If you're staying stock, then 4GA is plenty, but if you're looking at modifying it down the road (winches/lights/etc) then you'd want 2GA, and we all know a Jeep is never really done.

Details:
Fits: 1993-1998 Jeep Grand Cherokee ZJ Wire Gauge: 4 Gauge Liter: 4.0 Liter Engine Years: 1993-1998 Material: Copper Color: Red/Black Sold As: Kit