The Mile Marker HI12000 Series Hydraulic winch is made to be permanently mounted in the front or rear of a vehicle and comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient installation. Utilizing the vehicle's power steering system as its power source ensures the HI12000 will run continuously without draining the battery. Completely element proof construction, corrosion and water resistant, the HI12000 features two speed, free spooling, mechanical lock, an integrated solenoid valve, a ductile iron body, stainless steel tie bars and fasteners, reversible mounting on 3 sides, 100 feet of steel cable, 12,000 pounds of pulling capacity and includes an illuminated joystick remote control. Requires a vehicle specific 35 Series valve adapter kit to adapt to the vehicle's power steering pump Features: 2 Speed 12 Volt Includes illuminated Joystick remote control 12 foot Mechanical Lock Freespooling Integrated Solenoid Valve Fully Submersible Corrosion Resistant Stainless Steel Tie Bars and Fasteners 100 Feet Steel Cable Reversible Mounting on 3 Sides Ductile Iron Body Power Steering Pump Powered 100 percent continuous Duty Cycle Specifications: Gear Train Planetary Gear Ratio 6:1 Motor 19.5 Cubic Inch Control Pendant Illuminated Joystick Remote, 12 foot Cable 3/8 inch X 100 feet (nominal 14,400 lbs) (9.53 mm X 30.5 m) Dimensions 22.5 inch X 7.8 inch Drum Size 2.5 inch X 9 inch (63.5 mm X 228.6 mm) Net weight 110 lbs (50 kgs) Bolt Pattern 4 Bolt Pattern, 4.5 inch X 10 inch, (114.3 mm X 254 mm) Power Steering Min. Requirements 3.5 GPM at 1500 psi (13.25 L/m at 103.4 bars)